DS-SFP-FC32G-SW 32-Gbps Fibre Channel SW SFP+ Short wavelength
DS-SFP-FC32G-LW 32-Gbps Fibre Channel LW SFP+ Long wavelength
DS-SFP-FC16G-SW 16-Gbps Fibre Channel SW, SFP+ Short wavelength
DS-SFP-FC16G-LW 16-Gbps Fibre Channel LW, SFP+ Long wavelength
DS-SFP-FC16G-ELW 16-Gbps Fibre Channel ELW, SFP+ Extended long wavelength
SFP Transceiver Specifications
The Cisco MDS 9132T switch is compatible with SFP transceivers and cables that have LC connectors. Each
transceiver must match the transceiver at the other end of the cable in terms of wavelength. The cable must
not exceed the stipulated cable length for reliable communications to take place.
Cisco SFP transceivers support 850 to 1610 nm nominal wavelengths, depending upon the transceiver.
Use only Cisco SFP transceivers on the Cisco MDS 9132T switch. Each Cisco SFP transceiver is encoded
with model information that enables the switch to verify that the SFP transceiver meets the requirements for
the switch. For the list of supported SFP transceivers, see the Cisco MDS 9000 Series Compatibility Matrix.
Use only genuine Cisco SFP+ transceivers in Cisco MDS series switches. Each Cisco SFP+ transceiver is
encoded with serial number, vendor name, and other parameters that enable Cisco NX-OS to verify that the
transceiver meets the requirements of the switch. If discrepancies are found, the SFP+ will be allowed to
function, if possible, but will cause a warning syslog message to be generated. Cisco TAC does not support
switch ports populated with non-Cisco SFP+ transceivers.
For details about SFP transceivers see the Cisco MDS 9000 Family Pluggable Transceivers Data Sheet.
For information about safety, regulatory, and standards compliance, see the Regulatory Compliance and Safety
Information for the Cisco MDS 9000 Family.
SFP-FC-32G-SW-MM850
AFBR-57G5MZ-EL5
AFBR-57G5MZ
DS-SFP-FC32G-SW
FTLF8532P4BCV-EM
FTLF8532P4BCV-QL
AFCT-57G5MZ
XBR-000212
FTLF8532P4BCV
57-1000333-01
740-069233
DS-SFP-FC32G-LW
57-1000332-01
